GRIP-R je stezaljka za popravak tipa, idealan je za sve situacije u kojima trebate izvršiti trajni popravak pod pritiskom. Simply open up the coupling, wrap it around the pipe and fasten- you have repaired the pipeline such as pipe joints, cracks etc in minutes and avoided the need for costly downtime.
Pogodno za materijal cijevi: ugljični čelik, nehrđajući čelik, bakar, cunifer, lijevano i duktilno željezo, GRP, azbestni cement, HDPE, MDPE ,, PVC, UPVC, ABS i drugi materijal.
Radni pritisak do 40BAR.
The advantage of GRIP-R repair clamps is that is can befitted to existing pipes in situation, without any need to remove and replacing pipes, GRIP-R pipe repair clamp can repair the pipes that are ageing and corrosive and pipe wall has holes or cracks . When installing it, it only needs pipe clamp to wrap the leakage part and tighten the bolt. Then the installation is finished ideally and reliably.
Vanjski promjer stezaljke za popravak cijevi za savijanje cijevi je od 38 do 168,3 mm.
GRIP-R Tehnički parametri
| Cijev vanjski promjer | Stezaljka | Radni pritisak | Širina | Udaljenost između brtvenih klizača | Stopa zakretnog momenta | Vijak | |||||
| Osu | Min-max |  |  | B | C | bez traka umetak | |||||
| （Mm） | (U.) | （Mm） | (bar) | (bar) | (mm) | (mm) | (mm) | (mm) | (mm) | M | |
| 26.9 | 26-28 | 25 | 40 | 38 | 57 | 30 | 10 | 8 | M6 × 2 | ||
| 30 | 29-31 | 25 | 40 | 42 | 57 | 30 | 10 | 8 | |||
| 33.7 | 1.327 | 32-35 | 25 | 40 | 45 | 57 | 30 | 10 | 8 | ||
| 38 | 25 | 40 | 50.3 | 61 | 26 | 10 | 10 | ||||
| 42.4 | 1.669 | 25 | 40 | 54.7 | 61 | 26 | 10 | 10 | |||
| 44.5 | 25 | 40 | 56.8 | 61 | 26 | 10 | 10 | ||||
| 48.3 | 1.902 | 47-50 | 25 | 40 | 64.2 | 61 | 26 | 10 | 10 | ||
| 54 | 2.126 | 52-56 | 20 | 35 | 70 | 76 | 37 | 5 ～ 10 | 15 | 10 | M8 × 2 |
| 57 | 55-59 | 20 | 35 | 73 | 76 | 37 | 5 ～ 10 | 15 | 10 | ||
| 60.3 | 2.374 | 20 | 35 | 76.2 | 76 | 37 | 5 ～ 10 | 15 | 10 | ||
| 66.6 | 2.622 | 64-68 | 20 | 40 | 85.5 | 95 | 37 | 5 ～ 10 | 25 | 20 | M8 × 2 |
| 70 | 2.756 | 68-71 | 20 | 40 | 89 | 95 | 41 | 5 ～ 10 | 25 | 20 | |
| 73 | 2.874 | 71-75 | 20 | 40 | 92 | 95 | 41 | 5 ～ 10 | 25 | 20 | |
| 2.996 | 74-78 | 20 | 40 | 95.2 | 95 | 41 | 5 ～ 10 | 25 | 20 | ||
| 79.5 | 20 | 40 | 98.5 | 95 | 41 | 5 ～ 10 | 25 | 20 | |||
| 84 | 3.307 | 82-86 | 20 | 40 | 103 | 95 | 41 | 5 ～ 10 | 25 | 20 | |
| 88.9 | 3.500 | 87-91 | 20 | 40 | 108 | 95 | 41 | 5 ～ 10 | 25 | 20 | |
| 100.6 | 99-103 | 18 | 35 | 120 | 95 | 41 | 5 ～ 10 | 25 | 20 | ||
| 101.6 | 4.000 | 18 | 35 | 95 | 41 | 5 ～ 10 | 25 | 20 | |||
| 104 | 4.094 | 102-106 | 18 | 35 | 123 | 95 | 41 | 5 ～ 10 | 25 | 20 | |
| 104.8 | 4.126 | 18 | 35 | 124 | 95 | 41 | 5 ～ 10 | 25 | 20 | ||
| 108 | 18 | 35 | 127 | 95 | 41 | 5 ～ 10 | 25 | 20 | |||
| 4.500 | 112-116 | 18 | 35 | 133.4 | 95 | 54 | 5 ～ 10 | 35 | 20 | ||
| 127 | 5.000 | 18 | 40 | 148 | 110 | 54 | 5 ～ 10 | 35 | 25 | M12 × 2 | |
| 129 | 18 | 40 | 150 | 110 | 54 | 5 ～ 10 | 35 | 25 | |||
| 130.2 | 5.126 | 128-132 | 18 | 40 | 151.3 | 110 | 54 | 5 ～ 10 | 35 | 25 | |
| 133 | 131-135 | 18 | 40 | 154 | 110 | 54 | 5 ～ 10 | 35 | 25 | ||
| 139.7 | 5.500 | 138-142 | 18 | 40 | 160.8 | 110 | 54 | 5 ～ 10 | 35 | 25 | |
| 141.3 | 139-143 | 18 | 35 | 162.4 | 110 | 54 | 5 ～ 10 | 35 | 25 | ||
| 154 | 6.063 | 152-156 | 18 | 35 | 173.4 | 110 | 54 | 5 ～ 10 | 35 | 25 | |
| 159 | 6.260 | 157-161 | 18 | 35 | 180 | 110 | 54 | 5 ～ 10 | 35 | 25 | |
| 168.3 | 6.626 | 166-171 | 18 | 35 | 186 | 110 | 54 | 5 ～ 10 | 35 | 25 | |
Izbor materijala GRIP-R
| Materijalne komponente | V1 | V2 | V3 | V4 | V5 | V6 |
| Kućište | AISI 304 | AISI 316L | AISI 316ti | AISI 316L | AISI 316ti | |
| Vijci | AISI 304 | AISI 316L | AISI 316L | AISI 304 | AISI 304 | |
| Barovi | AISI 304 | AISI 316L | AISI 316L | AISI 304 | AISI 304 | |
| Sidreni prsten | ||||||
| Strip umetak (neobavezno) | AISI 301 | AISI 301 | AISI 301 | AISI 301 | AISI 301 |
| Materijal za pečat | Medija | Temperaturni raspon |
| EPDM | Sva kvaliteta vode, otpadne vode, zraka, krutih tvari i kemijskih proizvoda | |
| NBR | Voda, plin, ulje, gorivo i drugi hidrokanboni | -30 ℃ do+120 ℃ |
| MVQ | Visoka temperatura tekućina, kisik, ozon, voda i tako dalje | -70 ℃ do+260 ℃ |
| FPM/FKM |
Prijava:
Naftovod. Cooling water. Compressed air. Isperite vodu. Obrada vodom otpadnih voda. Raspodjela vode. Raspodjela plina. I druga polja.
